Why gutters matter more in Mississippi
With more than 50 inches of rain a year and heavy downpours, water comes off a roof in volume. Gutters that are undersized, sagging or clogged send it down the siding, into the fascia and against the foundation. Over time that means rotted fascia boards, stained siding, soil erosion and, in bad cases, water intrusion and foundation issues.
Why seamless
Seamless gutters are formed from a single length of aluminum on site, cut to the exact length of each run. Sectional gutters have a joint every ten feet, and every joint is a place to leak, separate and collect debris. Seamless gutters have far fewer joints, so there is far less to go wrong.
- Fewer leaks. Joints only at corners and downspouts.
- Cleaner look. Continuous runs along the roofline.
- Custom fit. Made to your measurements, not the nearest stock length.
- Long life. Aluminum does not rust and holds its finish well.
- Color options. White, brown, black and other finishes to match trim and siding.
When to replace instead of repair
- Gutters pulling away from the fascia or sagging between hangers
- Peeling paint, rust or stains on the outside
- Seams that leak despite repeated sealing
- Water overflowing during normal rain
- Standing water or plant growth in the gutter
- Fascia rot behind the gutters
Our recent work shows the difference. Old gutters clogged with debris and stained corner sections are replaced with clean, correctly sloped seamless gutters and new downspouts. Minor issues can be handled with gutter repair.
What a proper installation includes
- Measurement and planning. Roof size and pitch, downspout placement and drainage all determine the right gutter size.
- Removal. We take down and haul away the old system.
- Fascia check. We look for rot behind the old gutters before installing new ones.
- Sizing. 5-inch is standard, while 6-inch handles larger roof areas and heavy rain better.
- Correct pitch. A slight slope toward the downspouts so water does not stand.
- Hidden hangers. Sturdy hangers spaced closely enough to carry water and debris weight.
- Downspouts and extensions. Placed to carry water well away from the foundation, with splash blocks or extensions.
- Cleanup. Debris removed and the site checked.
Add gutter guards
If your yard has oaks, pines or sweetgum trees, consider gutter guards to cut down on cleaning. We will tell you where guards help and where they do not.
Materials
| Material | Notes |
|---|---|
| Seamless aluminum | Most popular residential choice; does not rust, many colors, good value |
| Steel | Stronger, heavier; available in various finishes |
| Copper | Premium, extremely long lasting, develops a natural patina |
To estimate the cost of a gutter project, use the gutter cost calculator, or call (662) 676-5023.
Gutter sizes and styles
| Option | Best for | Notes |
|---|---|---|
| 5-inch K-style | Most single-story homes | Standard size and the best value |
| 6-inch K-style | Large roofs, steep pitches, heavy tree cover | Carries roughly a quarter to a third more water |
| Half-round | Historic and high-end homes | Classic look; usually aluminum or copper |
| Oversized downspouts (3x4) | Big roof sections and heavy rain | Reduces overflow at corners |
Where downspouts should go
Downspout placement decides whether a system works. As a rule, each downspout should serve about 30–40 feet of gutter, with a downspout at every long run's low end and at inside corners where water concentrates. Discharge should be at least 4–6 feet from the foundation, with extensions or splash blocks, and away from walkways, driveways and neighboring property. On sloping lots, water should be directed downhill and away from the house.
Common problems we see, and how we fix them
Gutters overflowing in normal rain
Usually undersized gutters, too few downspouts, a clog or poor slope. Overflow soaks fascia and siding and erodes soil.
Sagging and pulling away from the house
Old spike-and-ferrule fasteners loosen, and rotted fascia cannot hold a gutter. Hidden hangers on solid fascia fix it.
Leaking seams and corners
Sectional gutters leak at every joint. Seamless runs eliminate most of them.
Rotted fascia and soffit
Constant overflow or a leaking gutter soaks the wood behind it. We check and repair it before hanging new gutters.
Water pooling at the foundation
Downspouts that discharge next to the house cause erosion, and in bad cases basement or crawlspace moisture.
Peeling paint and rust on old gutters
Painted or steel gutters wear out. Aluminum with a baked-on finish resists it.
Heavy leaf and debris loads
In Mississippi, leaves, seed pods and pine needles are the main load on gutters. Proper sizing and guards handle that.